Blog & Resources From the factory floor
How to source, compare, spec and install PPR, PEX and brass systems — written by an ISO 9001 and CE certified manufacturer, producing since 1993, not a content farm. Start with the two pillar guides, then browse by topic and read at your own pace.
I. Start Here Two essential guides
Before you import a container, spec a project or sign a distributor deal, it pays to understand the systems you are selling. If you read only two things before sourcing, read these — who to buy from, and what to sell.
Pillar Guide · Sourcing & Vetting · Live
Where to look, how to tell a real factory from a trading company, which certifications — SGS, CE, ISO — to check, the red flags that should end a conversation, and a reusable sourcing checklist you can apply to any supplier.
Read the sourcing guidePillar Guide · Choosing a System · Live
A B2B comparison across cost, lifespan, temperature, pressure and installation — when PPR wins, why PEX owns underfloor heating, and how brass ties the system together — so you stock what your market actually buys.
Read the comparison guideNew to sourcing? Start with the sourcing guide
II. The Library Browse by topic
Guides are grouped under the topics that matter most to importers, distributors, projects and installers — PPR systems, underfloor heating, brass and valves, sourcing and import, and the standards behind them. New guides publish on a rolling schedule.
Underfloor Heating · 13 Mar 2026
Cold loops, uneven floors, weeping eurocones and overheating screed: twelve underfloor heating manifold problems with cause and fix, plus the eurocone torque figure.
Read the guideUnderfloor Heating · 10 Mar 2026
How manifold flow meters work, how to read and set them, typical l/min ranges per circuit, why the 20 °C scale calibration only cancels on a supply-mounted set, and the six faults that make a meter read wrong.
Read the guideUnderfloor Heating · 10 Mar 2026
Every underfloor heating manifold part in one list, with the quantity rule for each and a note on what ships in the box versus what you have to order separately.
Read the guideUnderfloor Heating · 3 Mar 2026
A cold room is rarely a boiler fault — it is an unbalanced manifold. Calculate the flow rate each loop needs, set it on the flow meter, and read the symptoms when a floor stays cold.
Read the guideUnderfloor Heating · 25 Feb 2026
Manifold size follows the loop count, not the floor area. A four-step port-count method, an area-to-ports table, eurocone thread and torque detail, and six costly sizing errors.
Read the guideUnderfloor Heating · 21 Feb 2026
Follow the water through the flow bar, return bar, flow meters and actuators — with a full component reference table and the balancing faults that leave one room cold.
Read the guideIII. E-E-A-T From the factory, not a content farm
Most piping content online is written to rank, not to inform — thin listicles from marketplaces and content farms that have never welded a joint or shipped a container. Our guides come from a working factory floor.
PPR, PEX and brass systems plus underfloor heating, manufacturing since 1993 on our own extrusion, injection-moulding and machining lines — one complete system from one source, mixed in a single container. The standards you read here are the ones our own importers and project buyers hold us to.
ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 management systems, plus EU CE, Swiss SGS and Russian PT marks — third-party certifications you can verify in the issuing bodies’ own registers rather than take on trust. They are what decide tenders and market entry across Europe, Asia, Africa and beyond. Certificate numbers are available on request.
Every guide answers something our own importers, projects and private-label partners actually ask us. When a guide tells you how to spot a real factory, it is not theory — it is how we operate.
IV. Subscribe Stay updated
We publish practical, manufacturer-written guides for importers, distributors, projects and installers — from PPR welding and manifold installation to certification and importing. Subscribe and we’ll send each new guide as it goes live. No spam; unsubscribe anytime.
We publish sourcing, comparison, certification and installation guides written by the technical team. Tell us which systems you work with and we will send new guides as they go live — and answer any technical question you have in the meantime.
Ask the technical teamV. FAQ Common questions
Start Here Let’s talk
One manufacturer behind every guide — PPR, PEX, brass and underfloor heating from our own production lines, since 1993. Response time: within one working day.
